给料机采用三角皮带传动装置, 动力由电动机通过三角胶带传给振动器, 再由振动器的激振力作用, 使支承在弹簧支承座上的槽体产生激振英语翻译。

它的结构简单, 可以根据设计要求, 任意选择振动器适宜的转数。

The feeder is drove by the V-belt transmission gear, the power of it is transmitted to the vibrator through the texrope by the motor, which then causes the trough body supported on the spring excitation resulted from exciting force of the vibrator.

It is simple structure, and the rotating number of vibrator can be selected arbitrarily according to the design requirements.

电机支撑座

电机支承座为活动板式支座, 其两端均采用活动支铰联接, 而远端板面上下采用弹簧压紧式浮动定位, 因而电机支承座活动板在外力作用下可作上下翻动, 以保持在工作过程中, 两传动皮带轮的中心距衡定, 防止三角胶带的蹦断或松脱失效法语翻译。

Motor Supporting Beat

The motor supporting beat is of removable-plate type, the two ends connected by the removable trunnions and the upper and lower of remote plates positioned freely by means of spring compression, therefore the movable plates of motor supporting beat can turn up and down under foreign force to maintain stable center distance between two driving pulleys during operation, so as to prevent the texrope from snapping or failing of loosening.