………………………………………慢速传动装置…………………………………
采用行星齿轮减速机, 超越式爪形离合器, 具有点动正反转功能, 设有机械和电气连锁装置。其主要功能为: 在球磨机检修和更换衬板时使用, 在磨机长期停车或启动前, 启动慢速传动装置, 可松动磨机内钢球和物料, 避免对磨机筒体的强烈冲击。另外, 点动反转功能在实际生产当中是非常必要的, 而且在PLC程序中可采用慢传盘动电机功能, 主要用于检修主电机。同时, 该慢速传动装置可作为磨机启动时的辅助传动翻译公司。
慢传电机型号: YEJ315S-6制动电机
慢传电机参数: 60kW,380V,990r/min
慢传减速机型号: NCZD900-500-Ⅳ
慢传减速机速比: 500
慢传输出转速: 1.98r/min
慢速传动时, 筒体转速: 0.135 r/min
慢速传动装置安装于主动小齿轮的同一侧。(当磨机运转时, 如果小齿轮受力向下, 则规定该小齿轮为主动小齿轮西班牙语翻译)
……………………Low speed transmission device…………………………………
Planet gear speed reducer and overrunning jaw clutch are adopted, featuring inching normal/reverse turning function, and mechanical and electrical interlock device. It main function is: to be used when repairing ball mill and replacing lining, before long-term stopping or starting of mill, start low-speed transmission device, steel ball and material inside mill can be released, so as to avoid fierce impact upon mill drum. Furthermore, inching reverse turning is very necessary during actual production, and low-speed transmission motor shaft turning function can be adopted in PLC program, and is mainly used for repairing main motor. Meanwhile, the low-speed transmission device can be used as auxiliary transmission when starting mill.
Low-speed transmission motor model: YEJ315S-6 braking motor
Low-speed transmission motor parameter: 60kW,380V,990r/min
Low-speed transmission reducer model: NCZD900-500-Ⅳ
Low-speed transmission reducer speed ratio: 500
Low-speed transmission output rotation speed: 1.98r/min
During low-speed transmission, drum rotation speed is: 0.135 r/min
Low-speed transmission is installed on the same side of driving pinion. (When mill operates, if pinion is under downward force, then it is stipulated that the pinion is driving pinion)